Skip to content

Free Trading Tools

Plan a trade, check a strategy or review a prop-firm limit. Choose a tool or scroll down to try it.

Gold pip and lot size calculator

Enter your gold entry price, stop price and risk budget to estimate a trade size in lots.

Turn on JavaScript to use the calculator. The result shows the sample trade.

Trade details

Below entry to buy, above to sell

In your MT5 account currency

Position size

Buy 0.20 lots. Cash risk USD 100.00. Profit at target USD 200.00.

0.20 lots

Buy, stop below entry

Assumes 100 oz per lot. Check broker settings

  • Target 2360 Profit USD 200.00
  • Up to target, 2 × the stop distance
  • Entry 2350 Buy 0.20 lots
  • Down 5.00 to stop · 50 pips
  • Stop 2345 Loss USD 100.00
Highest price at top. Bar length is distance from entry. Cash before costs.
Cash risk at stop
USD 100.00
Profit at target
USD 200.00
Reward to risk
2 : 1
Stop distance (PineConnector pips)
50 pips 5.00 in price, 500 points, 500 ticks 1 pip = 10 points = 0.10
Risk per 1 lot
USD 500.00

Cash risk is your planned loss if the stop fills at its price, before spread, commission, swap and slippage. A price gap can make the real loss larger.

Broker settings 100 oz per lot, 2 decimals, 0.01 lot step
Broker settings

Copy these from your gold symbol in MT5: Market Watch, right-click, Specification. Profit currency must be USD.

Ounces per lot

2 means prices like 2350.25

Smallest price change

Lots round down to this

How it works

Lots before rounding = risk budget in USD ÷ (stop distance in USD per ounce × ounces per lot)

For the sample trade, USD 100 ÷ (5.00 × 100) = 0.20 lots. In a USD account, 1 lot of 100 oz gains or loses USD 100 for each 1.00 move in the gold price.

Money risk

Your risk budget is the most you plan to lose if the stop fills at its price. Enter it in your MT5 account currency.

Price distance

The gap between the sample entry and stop is 2350 − 2345 = 5.00 USD per ounce. For the same budget, a wider stop gives a smaller lot size. The target adds the profit and reward-to-risk figures.

Ounces per lot

Contract size is how many ounces one lot holds. The sample uses 100 ounces per lot. Check your symbol’s contract size in MT5 and enter it under Broker settings.

Accounts not in US dollars

Gold profit and loss are counted in US dollars. If your account uses another currency, enter how many units of it one US dollar buys. The calculator uses that rate to convert between dollars and your account currency. Your broker’s rate when the trade closes can differ.

Broker checks

The result rounds down to your volume step, so the planned loss at the stop stays within your budget. It shows 0 lots if the minimum volume would risk more than your budget, and stops at the maximum volume if your budget allows more. In MT5 Market Watch, right-click your gold symbol and select Specification.

PineConnector pips for gold

One PineConnector pip is 10 quoting points. That is 0.10 when gold is quoted to two decimals and 0.01 at three. Other sites may count gold pips differently, so compare pip counts only when the size matches.

Lot size, contract size and lot step in MT5

Back to tools

Forex session time converter

Choose a date and your time zone to see when each market opens and when London and New York overlap.

Convert session times

Example for Monday 2 November 2026 in UTC. Turn on JavaScript to change the date or time zone.

Date, time zone and broker offset

This is the trading date in each city. Monday in Sydney can start on Sunday in your time zone.

Choose your city or zone.

Use your MT5 server’s UTC offset for this date. We apply that one offset to all broker times.

Sessions on Monday 2 November 2026

London–New York overlap, 4 hours

13:00 to 17:00 UTC

Times in UTC

The striped band is when London and New York are both open. The dashed line marks midnight, where the day changes.

Session UTC
SydneyAustralia/Sydney · UTC+11 21:00 Sun to 06:00
TokyoAsia/Tokyo · UTC+9 23:00 Sun to 08:00
LondonEurope/London · UTC+0 08:00 to 17:00
New YorkAmerica/New_York · UTC−5 13:00 to 22:00

Each session is 08:00–17:00 local time on the selected weekday in that city. Holiday hours differ.

Next clock changes

  • New York Sun 14 Mar 2027, UTC−5 to UTC−4

  • London Sun 28 Mar 2027, UTC+0 to UTC+1

How it works

Each city keeps its own clock

The converter uses 08:00–17:00 local time, Monday to Friday, for each of the four sessions. The date you pick is the trading day in each city. The converter shows those hours in your time zone and in UTC, using each city’s daylight saving for that date.

The London–New York overlap

The striped band shows when London and New York are both open. The panel above the chart gives that window in your time and how long it lasts.

Broker offset (optional)

To see the times on your MT5 clock, choose your broker’s UTC offset for the date you selected. For example, UTC+2 means its server clock is two hours ahead of UTC. If you are unsure which offset applies on that date, check with your broker.

How daylight saving moves the overlap

The overlap usually lasts 4 hours. The UK and US change clocks on different dates in March and in October or November. In the weeks between, New York is 4 hours behind London instead of 5, so the overlap runs 12:00–17:00 UTC, 5 hours.

Check the broker offset when you change dates. Your broker may change its clocks on a different day.

Session time zones in Pine Script

Pass the city's IANA zone, shown under each session above, so the session follows that city's clock changes. :23456 limits it to Monday to Friday.

inLondon = not na(time(timeframe.period, "0800-1700:23456", "Europe/London"))

Without a zone, Pine uses the symbol's exchange zone, syminfo.timezone. The chart's time zone setting only changes labels.

Forex trading sessions explained

Back to tools

Position size calculator

Enter your account equity, risk per trade and stop distance to get a lot size.

Position size calculator
Current account value, including open trades
Enter 1 to risk 1% of equity at the stop
Distance from entry to stop loss
Value of one pip in your account currency
Volume step in your broker’s symbol specification
Minimum volume your broker accepts
Maximum volume your broker accepts per order

Worked example with the default inputs.

Position size within volume limits (lots)
0.33
Risk amount
100.00
Unrounded size (lots)
0.3333
Risk at the rounded size
99.00

Planned loss excludes trading costs. A stop can fill at a worse price.

Planned loss if the stop price is hit, account currency
Risk budget (1% of equity)100.00
Loss at the stop, 0.33 lots99.00
Rounding down to the volume step plans a loss of 99.0% of the budget at the stop. Gaps, slippage and costs are not included.

Illustrative calculator. Not a recommendation.

How it works

Lots = risk amount ÷ (stop distance in pips × pip value for one lot)

First, multiply account equity by the risk percentage to get the amount you plan to risk. Divide that amount by the loss on one lot at your stop. The calculator rounds the result down to your broker’s lot increment and caps it at the maximum size. If even the smallest lot exceeds your budget, the result is zero. In MT5, right-click the symbol in Market Watch and choose Specification to find its lot limits.

With your inputs 100.00 / (30 x 10) = 0.3333, after volume step and limits: 0.33

Position sizing methods for traders

Back to tools

Pip value calculator

Enter your trade size to see what one pip is worth. Add an exchange rate to convert it to your account currency.

Pip value calculator
Usually 0.0001 for EUR/USD or 0.01 for USD/JPY
Check the symbol specification in MT5
For example, 0.10 for a tenth of a lot
Leave blank for the value in the pair’s quote currency
Only used when you enter a conversion rate

Worked example with the default inputs.

Pip value (quote currency)
10.00
Per 1.00 lot (quote currency)
10.00
Pip value in account currency
Not converted
Value of a one-pip move, quote currency
Per 1.00 lot10.00
At 1 lot10.00
Pip value scales with volume, so 1 lot is 1 × the 1.00-lot value.

Illustrative calculator. Not a recommendation.

How it works

Pip value = pip size × contract size × lots

For a linear forex contract, the result is in the second currency of the pair. For EUR/USD, that is USD. To convert JPY to USD, divide by the USD/JPY rate. To convert GBP to USD, multiply by the GBP/USD rate. You can find your broker’s contract size in the symbol specification in MT5.

With your inputs 0.0001 x 100,000 x 1 = 10.00

What a pip is in forex trading

Back to tools

Risk/reward and partial-exit calculator

See how taking profit in stages changes your result if the next target or your stop gets hit.

Trade plan

The price you open the trade at.

Below entry for a long trade, above entry for a short.

Total lots, split across your targets.

In account currency, for 1 lot. Check your broker's contract details.

Take-profit targets

List targets in order, moving away from entry. Share is the % of the position closed at each target; shares must add up to 100%.

Broker lot rules and costs Lot step 0.01 · minimum 0.01 · cost 0 per lot

Smallest lot increment your broker allows. Partial closes are rounded down to it.

Smallest size your broker accepts for each close.

Commission to open and close 1 lot, in account currency. Enter 0 if none.

Sample result for the example values above. Turn on JavaScript to change the inputs.

Net result if all targets are reached (account currency)
+1,000.00
Reward to risk, all targets
2.00R
Risk if the stop is hit (1R)
500.00
Direction
Long
Round-trip costs included
0.00

Lots closed at each target

  1. Target 1 at 105.000.50 lots · 50%
  2. Target 2 at 115.000.50 lots · 50%

Net result as exits are reached (account currency)

  1. Stop hit before target 1−500.00 (−1.00R)
  2. Target 1 hit, rest stopped at 95.000.00 (0.00R)
  3. Both targets hit+1,000.00 (2.00R)

Each scenario closes the whole 1.00-lot position. Lots not closed at a target exit at the original stop of 95.00. Costs are included.

How it works

Result per exit = (exit price − entry) × value of a 1.00 move × lots closed, reversed for shorts. Net result = sum of exits − round-trip cost per lot × total lots.

Risk and R

1R is the net loss if the whole position hits the original stop, including round-trip costs. Every result is also shown as a multiple of that risk, so +2.00R means twice the amount you risked.

Splitting the position

Each target's share is turned into lots and rounded down to your broker's lot step. The last target takes whatever is left, so the lots always add up to your position size. If a part would be smaller than the minimum lot size, the calculator flags it instead of showing a close your broker would not accept.

Exit scenarios

Each row closes the whole position. Lots closed at a target earn that target's price; anything still open exits at the original stop. The calculator does not move the stop to breakeven or trail it.

Worked example, gross price logic

Long 1 lot at 100.00, stop 95.00, value of a 1.00 move 100, no costs. Target 1 is 105.00 for 50% and target 2 is 115.00 for 50%.

  • Stop hit: (95 − 100) × 100 × 1.00 = −500.00. This is 1R.
  • Target 1: (105 − 100) × 100 × 0.50 = +250.00.
  • Target 2: (115 − 100) × 100 × 0.50 = +750.00.
  • Target 1, then stop: +250.00 + (95 − 100) × 100 × 0.50 = 0.00, or 0.00R.
  • Both targets: +250.00 + 750.00 = +1,000.00, or 2.00R.

For a short trade the move is entry minus exit price, so targets sit below entry and the stop above it.

What it leaves out

These are scenarios, not predictions. Real fills can differ because of spread, slippage, gaps and swaps; add known commission as a round-trip cost. The calculator does not place or change orders.

Read the guide: How to calculate risk-reward ratio in forex

Back to tools

NAS100 and US30 lot size calculator

Enter your entry price, stop and broker settings to size an index CFD trade.

Index CFD lot size inputs
Your trade

Prefilled with an example trade. Replace it with your own.

Label only. It does not load or change broker settings.

Planned fill price, on your broker's tick grid.

Below entry for a long, above entry for a short.

In your account currency. Digits and a dot, no commas.

Enter 1 for 1% of equity. 100 at most.

Broker symbol settings Sample values

Illustrative sample values, not verified NAS100 specifications. Replace them with your broker's values.

In MT5, open Market Watch, right-click the symbol and choose Specification. Values differ between brokers and account types.

Smallest price change, for example 1 or 0.01.

Cash lost per tick against 1 lot, in your account currency. Convert it first if your broker quotes another currency.

Lot increment your broker accepts.

Smallest order size, a multiple of the step.

Largest single order size.

Result

Sample result for the prefilled example. This calculator needs JavaScript to update.

Fits your risk budget

Lot size to enter

2.0lots

Long NAS100, stop 50 index points away. 2.0 lots puts 100.00 at risk at the stop, within your 100.00 budget.

Calculated with the sample broker settings, for illustration only. Replace them with your broker's NAS100 values.

Direction
Long (stop below entry)
Stop distance
50 index points · 50 ticks
Risk per 1 lot at stop (account currency)
50.00
Size before rounding
2.00 lots
Risk budget vs planned loss at the stop, in account currency
Risk budget (1% of equity) 100.00
Planned loss at stop (2.0 lots, 100% of budget) 100.00
Unallocated budget 0.00

Planned loss at the stop is 100.00 of the 100.00 risk budget (100%). Nothing is left unallocated.

For index CFDs at your broker, not exchange futures. Cash risk excludes spread, commission, swap and slippage, and a price gap can fill your stop at a worse price.

How it works

Lots = (equity × risk % ÷ 100) ÷ (stop distance ÷ tick size × tick value)

1. Risk budget

Equity × risk % is the most you plan to lose if the stop is hit. With 10,000 equity and 1% risk, the budget is 100 in your account currency.

2. Risk per lot

Stop distance ÷ tick size gives the number of ticks to your stop. Each tick costs the tick value at 1 lot. In the example, 50 ticks × 1.00 = 50.00 per lot, so the budget covers 2 lots.

3. Your broker's volume grid

The raw size is rounded down to the volume step, so the planned loss never exceeds the budget. Above the maximum volume, the size is capped. Below the minimum volume there is no feasible trade: the smallest allowed order would risk more than your budget, so the result is 0 lots rather than rounding up.

Where to find your broker's values

In MetaTrader 5, open Market Watch, right-click the symbol and choose Specification. Look for tick size, tick value, minimal volume, maximal volume and volume step. Labels vary slightly, and brokers may name these symbols differently, for example USTEC, US100 or DJ30.

Tick value must be the cash lost per tick at 1 lot in your account currency. It is not always USD. Some brokers only list contract size and profit currency; in that case ask your broker for the tick value, or derive it from their specification and convert it to your account currency. Changing the symbol here never changes these numbers for you.

In MQL5 the matching properties include SYMBOL_TRADE_TICK_SIZE, SYMBOL_TRADE_TICK_VALUE_LOSS, SYMBOL_VOLUME_MIN, SYMBOL_VOLUME_MAX and SYMBOL_VOLUME_STEP. See the MQL5 symbol properties reference.

What it leaves out

This is for index CFDs, not exchange futures with fixed contract values. Spread, commission, swap, slippage and price gaps are not included. It sizes a position for a stop you choose; it is not a trade recommendation.

Read the guide: Lot size, contract size and lot step

Back to tools

Break-even win rate calculator

Enter your average win, average loss and trading costs to see the win rate you need to break even.

Break-even win rate calculator
Amount gained on a winning trade, before costs
Amount lost on a losing trade, before costs. Enter a positive number.
Total cost to open and close a trade, in the same units as your wins and losses

Worked example with the default inputs.

Break-even win rate with costs
44.00%
Break-even win rate before costs
40.00%
Added by costs (percentage points)
4.00
Average win ÷ average loss
1.50
Break-even win rate, share of all trades that must win
Before costs40.00%
With costs44.00%
Break-even win rateExtra win rate to cover costsTrades that can lose
Before costs you break even when 40.0% of trades win. Costs raise the break-even win rate to 44.0%.

Illustrative calculator. Not a recommendation.

How it works

Break-even win rate = (average loss + cost per trade) ÷ (average win + average loss)

The result is the share of trades that must win to cover your losses and costs. The same cost applies to wins and losses. Enter all three amounts in one currency, or in units of initial risk (R). If costs are already included in both averages, enter zero for cost per trade.

With your inputs (100 + 10) / (150 + 100) = 44.00%

How break-even win rate works

Back to tools

Expectancy calculator

Enter your win rate and the amounts you typically win and lose to estimate your average profit or loss per trade.

Expectancy calculator
Exclude trades that broke even. Enter 40 for a 40% win rate.
Amount gained per winning trade, after costs
Amount lost per losing trade, after costs. Enter a positive number.
If you risk the same amount on every trade, enter it here to see the result in risk units (R).

Worked example with the default inputs.

Average profit or loss per trade (account currency)
20.00
Expectancy in R
0.20
Average win ÷ average loss
2.00
Profit factor
1.33
Average per trade, account currency
Average contribution from wins80.00
Average contribution from losses−60.00
Expectancy, average result per trade20.00
On average each trade adds 20.00 (0.20R).

Illustrative calculator. Not a recommendation.

How it works

Expectancy = (win rate × average win) − (loss rate × average loss)

Use the share of wins and losses as decimals. A 40% win rate means 0.40 wins and 0.60 losses in the formula. Exclude trades that broke even, and enter all amounts in one currency after costs. If you risk the same amount each time, dividing expectancy by that amount gives expectancy in R. If your risk changes between trades, average each trade’s result in R separately.

With your inputs (0.4 x 200) - (0.6 x 100) = 20.00

Trading expectancy with a worked example

Back to tools

Drawdown recovery calculator

Enter a drawdown percentage to see the gain needed to get back to your peak.

Drawdown recovery calculator
Enter 20 for a 20% drop from the account’s high
Use your account currency

Worked example with the default inputs.

Gain needed to return to the peak
25.00%
Account value after the drop
8,000.00
Amount to regain
2,000.00
Equity, account currency
Peak10,000.00
Trough (−20%)8,000.00
Equity leftDrawdown
Losing 20% of the peak needs a 25.00% gain from the smaller trough to win back 2,000.00.

Illustrative calculator. Not a recommendation.

How it works

Recovery gain = drawdown ÷ (1 − drawdown)

Use the drop as a decimal. A 50% loss leaves half the starting amount. The smaller account now needs a 100% gain to get back to its previous high.

With your inputs 0.2 / (1 - 0.2) = 25.00%

How to measure and manage drawdowns

Back to tools

Kelly fraction calculator

Enter how often you win and how large your wins are compared with your losses to see the Kelly estimate.

Kelly fraction calculator
For example, enter 50 if half the trades win
Use amounts after costs. Enter 2 if wins are twice as large as losses.

Worked example with the default inputs.

Full Kelly estimate (% of equity)
25.00%
Estimate if the win rate falls by 5 percentage points
17.50%
Expectancy per trade (R)
0.50
Planned share of equity lost on a losing trade
Full Kelly fraction25.00%
Half Kelly, for illustration12.50%
Full Kelly if your win rate is 5 points lower17.50%
Full Kelly plans to lose 25.00% of equity on each losing trade. If your win rate is 5 points lower, that falls to 17.50%.

Small changes in win rate or payoff can change full Kelly sharply. Treat it as a model estimate. The lower-win-rate example stops at 0% wins.

Illustrative calculator. Not a recommendation.

How it works

Full Kelly = win rate − (1 − win rate) ÷ payoff ratio

Use the win rate as a decimal. The payoff ratio is the average win divided by the average loss, after costs. The model assumes independent trades with two fixed outcomes. Its answer is the share of equity at risk on a loss. If trade outcomes vary, averages alone cannot determine the Kelly fraction.

With your inputs 0.5 - (1 - 0.5) / 2 = 0.2500

The Kelly criterion in trading

Back to tools

Risk of ruin simulator

Choose a drawdown limit and see how often simulated trades take the account that far below a previous high.

Risk of ruin simulator
For example, enter 40 if 4 in 10 trades win
Enter 2 if a win earns twice what a loss costs, after costs
Enter 1 to risk 1% of the current account value
Enter 20 to count a 20% drop from a previous high
Choose 1 to 2,000 trades
Choose 10 to 5,000 runs

Worked example with the default inputs.

Simulations that hit your drawdown limit
6.85%
Number that hit the limit
137 of 2,000
Median of the largest drops across simulations
11.9%
Expectancy per trade (R)
0.20
Simulation results. Each run is one possible sequence of trades.
Runs that hit a 20% drawdown137 of 2,000
Hit the 20% drawdownDid not reach 20%
Middle run’s largest fall from a peak11.9%
Middle run’s largest fallYour 20% drawdown limit
137 of 2,000 runs hit a 20% drawdown at some point. 1,863 did not reach it. Ranked by largest fall, the middle run fell 11.9% from its peak at worst.

The result measures drawdown over the entered number of trades, not the probability of losing the entire account or a broker stop-out. Zero ruined runs means none in this finite sample. The model leaves out serial dependence, gaps and changing payoffs.

Illustrative calculator. Not a recommendation.

How it works

After a win, equity is multiplied by 1 + (risk fraction × win size). After a loss, equity is multiplied by 1 − risk fraction.

A 1% risk means risking 0.01 of the account’s current value on each trade. The simulator counts a run once its account drops by your chosen percentage from its highest value so far. Each simulated trade is independent, with the same win rate and the same win or loss size after costs. The same inputs always produce the same sample of trades.

Seed 4F9C90AB, derived from the inputs.

What risk of ruin means for your account

Back to tools

Prop-firm consistency and daily-loss calculator

Enter your daily results and current equity to check your best-day share and today’s remaining loss allowance.

Rule, daily results and equity

Sample values are filled in. Replace them with your own figures, all in one account currency.

Uses the limit, profit base and daily floor you enter.

What your best day is divided by.

Largest share one day may have. Enter 50 for 50%.

Each day's result from closed trades, in account currency. Use a minus sign for losing days and no thousands separators. Blank lines are ignored.

Today's equity level from your firm's daily loss rule, in account currency.

Includes open P&L, swaps and commissions.

Sample result for the filled-in values. Turn on JavaScript to calculate your own.

Consistency rule

Best day as a share of net closed P&L 83.33% Above the 50% limit
Extra profit neededAssumes no day beats your current best day
800.00
Best day
1,000.00
Net closed P&L
1,200.00
Sum of winning days
1,500.00
Days counted
3
Best day against the limit

Best day is 83.33% of net closed P&L. The limit is 50%.

  • Best day 1,000.00
  • Net closed P&L 1,200.00
  • Extra profit needed 800.00

Daily equity floor

Current room above the floor +2,000.00 Current equity is 2,000.00 above the floor.
Daily equity floor usedAs you entered it
97,000.00

This compares current equity with this one floor only. It doesn't check total drawdown or any other rule.

How it works

Best-day share = best day ÷ profit base × 100. Extra profit needed = best day ÷ (limit ÷ 100) − profit base.

A consistency rule caps how much of your profit can come from one day. Enter each day's result from closed trades, one per line, in your account currency. Your best day is your largest winning day.

Profit base

  • Net closed P&L: all days added together, losing days included.
  • Winning days only: the total of the days that closed in profit.

A share at or below the limit, including exactly equal, is shown as within the limit. Extra profit needed assumes the extra profit comes on days smaller than your current best day; if a new day beats it, the figure changes. With no winning day there is no best day, so no share or extra profit is shown. If you have a winning day but net closed P&L is zero or negative, there is no share, but extra profit needed is still shown.

Presets

  • Custom rule: uses the limit, profit base and daily equity floor you enter.
  • FTMO 1-Step, orders from 12 Oct 2026: for 1-Step orders created from 12 Oct 2026 09:00 platform time, and for accounts merged on or after then. Your best day can be no more than 50% of net closed P&L across all days.
  • FTMO 1-Step, earlier orders (legacy): for 1-Step orders created before that time and not merged since. Your best day can be no more than 50% of the total of your winning days.

Both FTMO presets set the daily equity floor to your balance at 00:00 CE(S)T minus 3% of initial capital. They don't use the custom limit, profit base or floor.

Daily equity floor

Room above the floor is current equity minus the floor. Current equity includes open P&L, swaps and commissions. This is separate from the consistency rule: it compares your equity right now with one floor.

What this tool doesn't check

It doesn't check total or maximum drawdown, other FTMO objectives, or whether you will pass or receive a payout. It can't tell whether equity fell below the floor earlier in the day. Confirm the rules for your account with your firm.

FTMO sources: FTMO Trading Objectives and FTMO trading update, 8 Oct 2026.

Read the guide: Prop firm drawdown types

Back to tools

These calculators are illustrative, not recommendations. Before you rely on a lot size, check contract size and volume step with your broker.